STEP 1: Unplug the CPAP tube from your CPAP machine. Connect it to the valve on the PurePAP™.
*If using a heated tube or smallertube for (Resmed Airmini, PhilipsDreamstation GO etc) then a tubeconnector may be needed toconnect to the PurePAP™ device.
STEP 2: Place the mask and water chamber in the bag. Zip it closed, keeping just enough of an opening for the tubeto pass.
Make sure the water chamber has been emptied, and driedbefore placing in the bag. Keep just the mask and chamberclosed inside the bag. The tube should stay connected to themask and remain out of the zipped bag. This is to ensure thereis enough space in the bag for the mask and chamber.
STEP 3: Hold down the power button for 5 seconds to startdevice. That's it. Come back in 1 hour and 30 minutes to findyour PAP components clean and ready to use!
Hold down the power button until you hear a "beep" sound andsee a light turn on the PurePAP™ device. The device willautomatically be set to timer mode. The cleaning process takes30 minutes. We recommend leaving the bag closed for 1 hourafter the cleaning is completed. Then unzip the bag to find yourCPAP equipment ready to use. The device will shut offautomatically 10 minutes after the cycle has finished.
When the device is connected to the charger, the device willbeep once, and a red light will appear. The light will turn greenonce it's completely charged.
LOW BATTERY: The device will beep 5 times every 10 secondswhen there is low battery. The device will still run on low batterybut may not complete a full cycle, only when the battery iscompletely drained will the device not turn on.
You cannot overcharge your PurePAR.
Timer Mode: This mode is the default setting when powering onyour PurePAP™. It will start to produce ozone in 1 minute and willstop automatically after continuously working for 30 minutes.After the 30-minute process, the built-in fan will keep working for5 more minutes to empty the residue ozone, then it will enter thestandby state with a "beep" sound. The indicator light is flashing,and automatically turns off after 10 minutes.
Intermittent Mode: Short press the power button to switchmodes. In this mode, the device works for the first 30 minutes toproduce 03, then turns into a cycle mode of 03 generation for 10minutes and pauses for 5 minutes in a rhythmic cycle. It will notstop working until it is powered off.
Continuous Mode: Short press the power button to switchmodes. In this mode, the device works to produce 03 for 5minutes and pauses for 5 minutes, working in a rhythmic cycle. Itwill not stop working until it is powered off.
Turn Off Device: Hold down the power button for 5 seconds,until the light on the device shuts off and a beep sound is made.
We recommend using the Timer Mode for most use cases.
2 Tube Connectors
PurePAP™ is designed to sanitize PAP equipment and accessoriesall at once using Activated Oxygen (03). Users can choose to useit daily or on a as needed basis for a thorough sanitization.
Electrical & Environmental Characteristics:
Power Consumption: 5W Max
Battery: 1 lithium ion battery, 2000 mAh. UL listed.
Adapter input: AC 100 ~ 240V, 50/60HZ
Adapter output: 5.0V
Storage temperature: 32 °F to 131 °F
Operating temperature: 50 °F to 100°F
CAUTION: Keep away from water sources including rain, bathtubs, and pools.
CAUTION: Do not start PurePAP™ if the bag is not zipped closed
with only room for the tube to exit from bag.
CAUTION: Keep away from open flame or fire.
CAUTION: Keep away from children. It is not a toy.
CAUTION: Do not use in explosive environments, near gas vapors, or other flammables, etc.
CAUTION: Do not place any items on top of your PurePAP™ or bag, particularly flammables or ignitable items.
CAUTION: Never place any living things inside the PurePAP™ bag.
WARNING: Do not dismantle the PurePAP™ device.
WARNING: Do not run the PurePAP™ device for more than 2 hours consecutively.
WARNING: There are sensitive electronics inside the PurePAP™ device. If your PurePAP™ device or bag is soiled, wipe it clean with a dry cloth. Do not submerge your PurePAP™ device, and do not use any chemical cleaners to clean them.
WARNING: Do not use PurePAP™ while your PAP machine is in use.
PurePAP™ has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of FCC rules. The included adapter is UL listed and RoHS certified.
Model No: S4PLUS
PurePAP™, INC. warrants these products under the following warranties, per the factory: 12-month warranty for defects in manufacture or workmanship of the device, a 12-month warranty for defects in manufacture or workmanship of the charger, and a 90-day warranty for defects in manufacture or workmanship of the bag.
For all warranty issues, a Return Authorization number and Proof of Purchase is required. Please contact PurePAP™ at or call 888-410-3076. The return shipping cost is the responsibility of the customer; therefore, returned products must be shipped prepaid and insured. CODs are not accepted. Original shipping fees are non-refundable. Products repaired or replaced under warranty will not incur reshipping charges. Under this warranty, the sole remedy shall be repair, exchange, or replacement at PurePAP™'s discretion.
This warranty does not cover any charges for labor, downtime, or any other consequential or incidental damages resulting from the sale, use, or improper functioning of the product. The warranty does not cover product failures due to misuse, abuse, improper functioning of the product. The warranty does not cover product failures due to misuse, abuse, improper maintenance, normal wear and tear, typical required periodic replacement products, or circumstances beyond the control of PurePAP™ Inc... Using any charger other than the PurePAP™ charger voids the warranties for both the PurePAP™ device and the charger.
Disclaimer: This product or statements have not been evaluated orendorsed by the Federal Food and Drug Administration. Theproduct and publication are not intended to diagnose, treat, cure, orprevent any disease or medical condition. It is not intended to be asubstitute for informed medical advice or care. Always consult aphysician before beginning therapy of any kind, especially ifpregnant or nursing. The information provided herein should not beconstrued as health care diagnosis, treatment regimen or any otherprescribed health care advice or instruction. You should consultyour healthcare professional for individual guidance for specifichealth problems. Persons with serious medical conditions shouldseek professional care. Pregnant women should consult with theirhealth care professional before using this product. No medicalclaims are intended or implied in conjunction with the sale of thisproduct. The purchaser accepts full responsibility for the safe andproper use of this product. The degree of benefits derived from theuse of this product may vary with each individual. No action shouldbe taken based solely on the content of this information providedherein.
LIMITATION DAMAGES: PurePAP™ SHALL NOT BE LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FORBREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THISPRODUCT.
EVERY EFFORT HAS BEEN MADE TO ENSURE THE COMPLETEACCURACY OF THE CONTENTS OF THIS MANUAL. NOLIABLITY ARISING FROM ITS USE, HOWEVER, CAN BEACCEPTED BY THE COMPANY, WHO RESERVES THE RIGHT,WITHOUT PRIOR NOTICE, TO ALTER THE SPECIFICATIONS,CONSTRUCTION, OR CONTENT OF ITS EQUIPMENT AT THECOMPANYS OWN DISCRETION.
Fill Out The Form Below Or Call 888-410-3076 To Order Your PurePAP™ Now!
When ordering today, you will receive a PurePAP™ CPAP Cleaning Machine, CPAP Mask Sanitizing Bag Set, 2 CPAP Tube Adapters for a one-time payment that costs $249.95 + Free Packaging & Handling.
We offer a 90-day Money Back Guarantee less Packaging & Handling. Continental U.S. orders only.
By clicking the Process Now button you are placing a live order and agreeing to the terms of our 90-Day Money Back Guarantee.